For a list of Dealers visit our "WHERE TO BUY" page.

Now You Can...

Turn an Ordinary Window into an Extraordinary Window!

with Quality Wood & Vinyl Grille Inserts.

              

   Non Surround Colonial Style             Full Surround Prairie Style     

  • Enjoy the beauty of finely crafted multi-pane windows without the expense or upkeep.
     
  • Enhance the beauty and value of your home at a fraction of the cost of replacement windows.
  • Select from our classic grilles in the colonial or diamond patterns, or consider a custom design.
  • Easy To Order, Install, and Maintain

 Quality Materials and Workmanship

Our Do It Yourself grille inserts are available in solid pine and oak wood and also in white vinyl.

Wood grilles can be stained or painted to match the interior decor of your home.

Vinyl grilles are available in white only.


 Interior Grille Materials

Oak or Pine Wood & Vinyl Grille Bar Profiles


"M" Oak
5/8 x 7/16


"M" Pine
5/8 x 7/16

"M" Vinyl
5/8 x 7/16

"S" Vinyl
7/8 x 1/4

"S1" Pine
7/8 x 1/4

"S-2" Pine
7/8 x 5/16

"S-3" Pine
7/8 x 9/16

"L" Pine
5/8 x 9/16

"N" Pine
7/8 x 9/16

"O-1" Pine
7/8 x 7/16

"P" Pine
1-7/32 x 9/16
 

Pine Wood Surround Profiles      


"D" Pine
3/8 x 9/16

"R" Pine
7/16 x 9/16

"H" Pine
1/2 x 9/16

"I" Pine
1/2 x 9/16

"J" Pine
1/2 x 9/16

J-2" Pine
1/2 x 9/16

"K" Pine
1/2 x 9/16

"K-2" Pine
1/2 x 1/2

"C" Pine
9/16 x 9/16

"A" Pine
1 x 13/16
   

 

 


Grille Fastening Devices

Non Surround Fasteners

  

 Standard Push Pin

for use on 5/8", 7/8", or 1-7/32" wide bars

The standard push pin is an injection molded clear plastic fastener with inset nail and works with the following bar profiles: M-Oak, M-Pine, M-Vinyl, O-1 Pine, N-Pine, P-Pine, S-3 Pine

  • Part# LCS-034
  • Part# LCS-034W (white)
  • Part# LCS-034B (bronze)

 Star Wars Push Pin

for use on 5/8" or 7/8" wide bars

The Star Wars push pin is an injection molded clear plastic fastener with inset nail and works with the following bar  profiles: M-Oak, M-Pine, M-Vinyl, O-1 Pine, N-Pine, S-3 Pine

  • Part# LCS-032      Fits 5/8" Wide Stock
  • Part# LCS-028      Fits 7/8" Wide Stock

 

 Wrap Around Clip

for use on 5/8" wide x 7/16" tall bars only

The Wrap Around grille clip is a roll form aluminum available in  white or  bronze finish and works with the following bar profiles: M-Oak, M-Pine, M-Vinyl

  • Part# White     -     #2032
  • Part# Bronze  -     #2032-B2

Dual Lock Adhesive

for use on all bar profiles

Dual Lock Adhesive is an innovative fastening system that meshes with itself and allows our grilles to adhere to windows where ordinary push pin fasteners will not work.  

The material is clear and works with the following bar profiles: All Bar Profiles

Where double hung window Check Rail Clearance is an issue Dual Lock Adhesive is the answer.

Dual lock can be flush mounted or recessed into the bar for even thinner  applications. 

The material is adhesive backed and will adhere to wood, vinyl, and glass. The grilles can be easily removed and re-attached over and over again.

Full Surround Fasteners

Standard Push Pin W/Grommet

for use on Full Surround grilles

The standard push pin is an injection molded clear plastic fastener with inset nail

The grommet is a clear plastic sleeve that is pressed into a hole in the surround material and acts to protect the wood from wearing out when the fastener is depressed during repeaded removal and installation.

  • Part# LCS-017     -     Push Pin
  • Part# LCS-016     -     Grommet (sleeve)

 Stainless Steel Concealed Grille Clip

for use on Full Surround grilles

The concealed grille clip is a press form Stainless Steel grille fastener

The fastener's sharp point is pressed into the edge of the sash at glass level. The grille is held in by side pressue in at least 2 point on both sides of the grille surround.

  • Part# 1203C

Stock Patterns ... Wood or Vinyl

(Diamond Lite Grilles Available in 5/8" wide material only)

COLONIAL DESIGN LAYOUT EXAMPLES

  


RADIUS GRILLE DESIGN LAYOUT EXAMPLES

(No Surround Only)

 


KD-EZ Fit Grilles for Half Round and Quarter Round Windows

KD-EZ Fit Grilles for Half Round and Quarter Round Windows

 General Information:

JJJ Specialty Co. has developed a system that allows easy fitting of grilles into 1/2 Round & 1/4 Round window units. The system features a solid grille hub that is slotted to accept our pattern "L" (5/8" wide x 9/16" thick) standard pine grille bar profile.

All grille bars are furnished 48" long and have a compression spring inserted in the end of the grille bar that fits into the grille hub. The spring will compress 1/2" allowing for approximately 3/8" tolerance in fitting the grilles into your windows. This system will permit one standard size grille to be easily trimmed to fit all windows up to 8' diameter (4' radius).

 Installation:

Hub size: 7" x 3-1/2" x 31/32"

Bar size: 5/8" x 9/16" x 48"

To Cut Bars To Length:

  1. Set hub at center of bottom jamb stop against the glass.
  2. Measure distance from outside edge of hub to edge of glass on each radial.
  3. Add 1-3/4" to measurement and cut to length on end opposite spring.
  4. Push the spring end of the bar into the hub and the spring will compress leaving enough tension to secure the grille to the window unit.

For a list of Dealers visit our "WHERE TO BUY" page.